市面上的潤滑脂五花八門，價格從幾十到幾百不等。但GENMA提醒您：潤滑脂不是越貴越好，關鍵是選對型號。

GENMA推薦的潤滑脂標準

根據維護手冊，GENMA設備多數脂潤滑點推薦使用：GADUS S2 V220 2。這是一款高性能鋰基潤滑脂，適用于寬溫范圍，具有良好的抗磨損、防腐蝕和抗氧化性能。

需要說明的是，GADUS S2 V220 2只是一個性能標準的參考。選脂時，環境溫度是首要考慮因素。這款型號適用于-20℃至+130℃的溫度范圍，覆蓋了大多數溫帶和亞熱帶地區的使用場景。如果設備長期在低于-20℃的嚴寒地區作業，需要選用稠度更軟的潤滑脂（如NLGI 1或0）以保證低溫泵送性；如果設備在高溫環境下運行，則需選用耐高溫合成潤滑脂。在極寒或極熱工況下，請聯系GENMA售服工程師獲取針對性建議。

為什么不能隨便替代？

不同潤滑脂的稠度、滴點、極壓性能差異很大。如果用了不合適的潤滑脂：

?太?。焊邷叵铝魇?，潤滑失效

?太稠：低溫下無法泵送，中心潤滑系統堵塞

?基礎油不兼容：導致潤滑脂變硬、分油

選脂三原則

1、看品牌和規格：優先選擇GENMA指定的品牌型號

2、看環境溫度：當?shù)貧夂驔Q定潤滑脂的稠度等級（如NLGI 2適用于大多數溫帶地區）

3、看用途：重載、低速用極壓脂；高速、輕載用普通脂

順便提醒：潤滑脂也會過期

潤滑脂不是“永久有效”。如果發現顏色發黑、表面浮油、硬化結塊、乳化發白或聞到酸臭味——說明已經變質，別再用了。變質的潤滑脂不僅沒用，還可能加速磨損。

如果您還有其他潤滑脂方面的疑問，可以咨詢您的專屬GENMA售服工程師。

GENMA Maintenance Tip | How to Choose the Right Grease?

Not all greases are created equal – prices range from cheap to crazy expensive. But here’s the truth: the most expensive grease isn’t always the best. The right match matters way more.

GENMA’s go-to grease

For most lubrication points on GENMA equipment, we recommend GADUS S2 V220 2 – a high-performance lithium-based grease that handles wide temperatures, resists wear, and fights corrosion and oxidation.

Just to be clear: GADUS S2 V220 2 is a performance reference, not a fixed rule. When choosing grease, ambient temperature is your first consideration.

This grade works well in temperatures from -20°C to +130°C, which covers most temperate and subtropical regions.

Below -20°C (extreme cold)? Go with a softer NLGI 1 or 0 grease for better pumpability.

High-temperature conditions? Choose a high-temperature synthetic grease.

For extreme hot or cold environments, contact your GENMA service engineer for specific recommendations.

Why you shouldn’t just grab any grease

Different greases have very different thickness (consistency), drop points, and pressure performance. Using the wrong one can cause:

Too thin → melts away under heat → no lubrication

Too thick → won’t pump in cold weather → clogs your central lube system

Incompatible base oil → grease hardens or separates → total failure

3 simple rules for picking grease

1. Brand & spec – Stick with GENMA-recommended types when possible.

2. Ambient temperature – Choose the right NLGI grade (e.g., NLGI 2 works for most temperate regions).

3. Application – Heavy loads & low speeds = extreme-pressure grease. High speed & light loads = standard grease.

Yes, grease expires too

It doesn’t last forever. Stop using it if you see:

? Dark or black color

? Oil separating on top

? Hard, crusty chunks

? White, milky look (water contamination)

? Sour or rotten smell

Expired grease doesn’t just fail – it can speed up wear

Still unsure? Ask your GENMA service engineer – we’re here to help.

【點分享】

聲明：本文系轉載自互聯網，請讀者僅作參考，并自行核實相關內容。若對該稿件內容有任何疑問或質疑，請立即與鐵甲網聯系，本網將迅速給您回應并做處理，再次感謝您的閱讀與關注。